| Author/s (sorted by principal author) |
Title (click to read abstract) |
| |
|
| Daniel J. Barker and Dr. Karen M. Coyne |
An Assessment of CBRN PPE Audible Signature |
| |
|
| Omar Bekdash, Prakash Chapain, and Arthur Johnson |
Development of an air sampling system for detecting oxygen leaks from the facepiece of a closed circuit self-contained breathing apparatus |
| |
|
| Michael Bergman, Ziqing Zhuang, Joseph Wander, David Hanson, Brian Heimbuch, Michael McDonald, Andrew Palmiero, and Ronald Shaffer |
Fit Test Evaluation of an Advanced Respirator Headform |
| |
|
| Larry A. Brey |
Effect of High Relative Humidity on OV Cartridge Performance |
| |
|
| David Caretti and Karen Coyne |
Thermophysiological and Subjective Impacts of Two Different Respirator Ambient Air-Cooling Options during Mild Hyperthermia |
| |
|
| Prakash Chapain, Omar Bekdash, and Arthur Johnson |
Flow based oxygen leak detection system in closed circuit self-contained breathing apparatus |
| |
|
| R. Chauveau, G. Grévillot, S. Marsteau, and C. Vallières |
Prediction of the service life time of cartridges for personal protection: Discussion on the pertinence of 3 models |
| |
|
| Chih-Chieh Chen, Yu-Mei Kuo, Che-Ming Yang, Sheng-Hsiu, Chun-Wah Chen |
A Novel High Protection Exhalation Valve for Respirators |
| |
|
| Cheryl Colton |
Healthcare’s Challenges with regard to Respiratory Protection |
| |
|
| Karen M. Coyne and Daniel J. Barker |
Respirator Speech Intelligibility Testing with a Highly Trained Speaker |
| |
|
| Jennifer V. Romero, Jock W. H. Smith, Braden M. Sullivan, J. R. Dahn, and Lisa Croll |
A Combinatorial Method for the Synthesis and Characterization of Multigas Capable Respirator Carbons |
| |
|
| Debra J. Deininger |
Embedded Sensors for Respirator Applications |
| |
|
| Alfred DeMaria |
Infection Control and Respiratory Protection: A Matter of Perspective |
| |
|
| Frank Ding, Michael Parham, Amy Quiring |
Calculating service life time for compound chemicals with group contribution compensation |
| |
|
| Aaron Eagan |
The Respiratory Protection Effectiveness Clinical Trial (ResPECT) |
| |
|
| Edward M. Fisher, Caroline M. Ylitalo, Narina Stepanova, Ronald E. Shaffer |
Assessing Filtering Facepiece Respirator Contamination During Patient Care in Flu Season: Experimental and Modeling Approaches |
| |
|
| Paul Gardner |
The ESLI Challenge: It’s About the Requirements |
| |
|
| Megan Gosch |
Improvements in respiratory protection for Healthcare workers (project BREATHE) |
| |
|
| David Gurden |
Evaluation of Respirator Fit Testing Protocols - A practical approach |
| |
|
| Hiroki Haruta, Hisashi Yuasa, Eriko Shimizu, Kazushi Kimura, Hitoshi Emi, Kousuke Nozaki, Isamu Kabe, Shigeru Tanaka |
Estimation of Work Rate in Workplaces Using Breathing Pattern Data |
| |
|
| Jessica Hauge, Marc Roe, Lisa Brosseau, and Craig Colton |
Real-Time Fit of a Respirator during Simulated Healthcare Tasks |
| |
|
| Xinjian (Kevin) He, Michael Yermakov, Tiina Reponen, Sergey A. Grinshpun |
Performance Evaluation of an Elastomeric Half-mask Respirator on a Manikin with Combustion Aerosol |
| |
|
| Lin Li , Zhili Zuo, Daniel Japuntich and David Y.H. Pui |
Evaluation of Filter Media for Particle Number, Surface Area and Mass Penetrations |
| |
|
| Arthur T. Johnson |
Physiology of Respirator Wear: Why Adding Resistance Shortens Endurance Time |
| |
|
| Varun Kapoor |
Extending the Perception of Speech Intelligibility in Respiratory Protection |
| |
|
| Zhipeng Lei and Jingzhou (James) Yang |
Computational Fluid Dynamics-Based Respirator Fit Prediction - A Pilot Study |
| |
|
| Krzysztof Makowski, Agnieszka Brochocka |
Assessment of efficiency of meltblown filtering materials used for respiratory protective devices against nanoparticles |
| |
|
| C.R. Manning, G.O. Nelson, T.E. Crabtree, and A.R. Piedmont |
Improvements in Atmosphere Generators Used in Chemical Challenge Testing of Air-Purifying Respirators |
| |
|
| Stephanie Marsteau, Bruno Galland |
Service life of respirator cartridges with organic vapors: two approaches for a better understanding |
| |
|
| Richard W. Metzler |
Conformity Assessment Standards – A Necessity to Support an ISO Respirator Protective Device Standard |
| |
|
| Eve Neesham-Grenon, Jacques Lavoie, Simon Smith, Geneviève Marchand, Yves Cloutier and Maximilien Debia |
Control Banding Method for Respirator Selection against Bioaerosols in Quebec |
| |
|
| William Newcomb |
A History and Overview of ISO Respiratory Standards |
| |
|
| Debra A. Novak |
Surgical Smoke Plume Research & Respiratory Protection Best Practice |
| |
|
| —— |
NPPTL/NIOSH Healthcare Respiratory Protection Research Initiatives |
| |
|
| Michael L. Parham |
Making ESLI part of the Respiratory Protective Device system: A manufacturer’s perspective |
| |
|
| Suzanne Pelfrey |
Future Designs for Low Burden Respiratory Protection |
| |
|
| Hee-Siew (Ryan) Han, Mark Prell, and Richard Remiarz |
Penetration of N95 Filtering-Facepiece Respirators by Charged and Charge-Neutralized Nanoparticles |
| |
|
| Samy Rengasamy and Benjamin C. Eimer |
Nanoparticle penetration through filter media and through face seal leakage of N95 filtering facepiece respirators |
| |
|
| Joseph A. Rossin and Gregory W. Peterson |
Removal of Toxic Chlorine-Containing Chemicals by Zirconium Hydroxide-Based Sorbent Media |
| |
|
| Ronald E. Shaffer and Edward M. Fisher |
Reuse of N95 Filtering Facepiece Respirators: What Have We Learned and Where Do We Go Next? |
| |
|
| Margaret Sietsema, Lorraine Conroy, Kari Cline, Lisa Brosseau |
Scoring Hospital Respiratory Protection Programs using Written Programs and Interview Data |
| |
|
| Edward Sinkule, Jeffrey Powell, and Fredric Goss |
Evaluation of N95 Respirator Use with a Surgical Mask Cover: Effects on Breathing Pressures, Inhaled Carbon Dioxide and Inhaled Oxygen Concentrations |
| |
|
| Carmen Smith, Jane Whitelaw, Brian Davies |
Phonic Respiration and its Impact on Carbon Dioxide Re-breathing in Respiratory Protective Devices (Pilot Study) |
| |
|
| Simon Smith |
Use of Control Banding Methods in Respirator Selection for Biohazards |
| |
|
| Jay Snyder |
NPPTL’s R & D Program for End of Service Life |
| |
|
| Alberto Spasciani |
A critical approach to ISO 17420 (All that glitters is not gold) |
| |
|
| Girish Srinivas, Joe Fredrickson, Steve Gebhard, Bob Copeland, Georgia Mason |
Cooling System for Level A Hazmat Suits |
| |
|
| Dan Symons |
Use of Speech Transmission Index (STI) for Voice Intelligibility Testing of Respiratory Protection Devices and Proposed Measurement Method |
| |
|
| Saki Tateishi, Norikazu Kurano, Meguru Inai and Hiroshi Yamada |
Suitable chemical cartridges against gaseous substances generated from the solutions used for preservative treatment |
| |
|
| Ludovic Tuduri, Florence Janvier, Yves Cloutier, Daniel Cossement, Daniel Drolet, Jaime Lara |
Going Towards Saturisk 2. Updates and improvements for predicting service life of organic vapors cartridges |
| |
|
| Ilse Tuinman |
The Filtration Efficiency of Bacteria compared to Standard Test Particles |
| |
|
| Andrew Viner |
Results of Round Robin Particulate Filtration Testing in Support of ISO TC94/SC15 |
| |
|
| ——, M.D. Luinenburg, and M.M. Jamieson |
A Test System Optimized for Precise Measurement of High Fit Factors |
| |
|
| Dan E. Warkander |
Work of breathing imposed by a respiratory protective device: the ISO approach to judge acceptability of a respiratory protective device |
| |
|
| W. Jon Williams |
Respirator Testing Standards and Physiology A review of 42 CFR pt. 84 Respirator Test Standards and the Physiological Responses to Oxygen and Carbon Dioxide in the Breathing Environment |
| |
|
| Hiroshi Yamada |
On the Status of PAPR in Japan |
| |
|
| Xiao-bing Yang , He Fang, Bin Zhao, Bo Yang, Song-tao Ding |
Inward Leakage and Protection Factor in Respirator Standards |
| |
|
| Ziqing Zhuang |
Development of Respirator Fit Test Panels for use in Respirator Testing Standards |
| |
|
| |
|
