Protective Dead Volumes in Powered Air Purifying Respirators

Arthur T. Johnson

University of Maryland 

An Assessment of Physiological Changes Due to Respirator Wear During Anaerobic Cycling

Bardsley, S.M., Sullivan, F.J., Felice-Luebeck, M.M. and Anderson, A.O.

Montana Tech of the University of Montana 

Design of Respirators for Wildland Firefighting

Fogging and Respiratory Simulation System

Claire Pickering

Defence Science & Technology Laboratory (Dstl), United Kingdom 

Limitations to Treadmill Running From an Approved Air Purifying Respirator

Dan E. Warkander, Barbara Shykoff, John Camperman

Navy Experimental Diving Unit, 321 Bullfinch Road, Panama City, FL 32407, USA
Naval Surface Warfare Center, 6703 W HWY 98, Panama City FL 32407, USA 

Chemical Personal Protective Equipment (CPPE) for Health Service First Responders: the United Kingdom Approach

Dr Ian Crawford, Professor Kevin Mackway-Jones and Dr David Russell

Manchester Royal Infirmary, UK 

Some Factors Affecting Adsorbent Bed Design - 1

Dr Mike Williams, Lyndsay Dunne, Tom Ritchie

Cranfield University 

The Use of SCSRS During Recent Mine Accidents in the U.S. And Subsequent Regulatory Improvements for SCSRS

Dr. Jeffery H. Kravitz

Mine Safety and Health Administration (MSHA)
U.S. Department of Labor 

Respiratory Protection Standards for Children

Esther Krasner

IMOD – Chief Scientist for CBRN, Hakirya , Tel Aviv, Israel 

A Canadian Standard for CBRN Protection for First Responders

Eva F. Gudgin Dickson, and the Technical Committee of CGSB-205.1-CSA Z1610

RMC Canada 

D-R Plots for Several OV Cartridges

Gerry O. Wood, Ph.D.

Gerry Odell Consulting 

European and American Respirator Fit Testing: Comparison of the Particle Penetration Test — Methods and Adaptation of the Test Equipment

Hans-Georg Horn, Tim Johnson

TSI, GmbH 

Generated Atmosphere Chamber for Approval Testing of Respirators.

Heinz Ahlers, JD, Jeffery A. Peterson, Terry L. Thornton

National Institute for Occupational Safety and Health 

Performance of Breath-synchronised, Powered, Air-purifying Respirator Under Simulated Usage Conditions

Hisashi Yuasa, Eriko Shimizu, Kazushi Kimura, Hitoshi Emi and Kosuke Nozaki

KOKEN Ltd, Japan 

Continuity of Service and Functionality With New Quantitative Fit Testing Systems

Ian Bennett

TSI 

In Mask Particle Generation and Its Effect on the Measurement of High Protection Factors With Portacount

Ilse Tuinman, Tineke Albers, Leo Steenweg

TNO 

A Cartridge Simulator for Testing End of Life of Service Indicators

J. L. Snyder L. E. Weiss L. Shultz and T. R. Rozzi

National Personal Protective Technology Laboratory NIOSH Pittsburgh Pa
The Robotics Institute Carnegie Mellon University Pittsburgh PA 15213
EG&G Technical Services Inc. Pittsburgh PA 

A New Service Life Indicator for Organic Vapour Cartridges

Jaime Lara, Daniel Cossement, François Lemay, Daniel Drolet and Emmanuelle St-Pierre

IRSST 505 West De Maisonneuve Blvd. Montreal Quebec Canada
Institut de recherches sur l hydrogène Université du Québec à Trois Rivières Quebec Canada 

Organic Vapour Cartridge Breakthrough Curves Upon Reuse After Storage

Jay L. Snyder and Gerry O. Wood

NIOSH

RPE for the Changing Threat

John Penton

Avon Protection Systems 

A Computational Method for Evaluating Fit

Kathryn M. Butler

NIST 

Effect of Ionizing Radiation on Filtration Efficiency of Materials Used in Respiratory Protection on the Example of Radon

Krzysztof Makowski

Central Institute for Labour Protection, Poland. 

Volume, Flow and Speed: Three Combined Factors That Govern Filter Performance

Leif Ekman

EZE Communications 

Evaluation of the Niosh Personal Protective Technology Program

Leslie Boord

National Institute for Occupational Safety and Health 

Assessment and Modelling of Adsorbents for Low Burden Respiratory Protection

M.W. Smith

Dstl, UK